Short description on FS701:

The FS701 flying saw firmware is used to control flying saws or flying shears. They are used to cut materials to length if they can’t be stopped during the cutting process. The application design includes a saw carriage that moves in the direction of the material. During the cutting operation it runs synchronously with the material and returns to its basic position after the cut has been completed.

• MC700 is a universal motion controller for 1 to 4 axis, programmable for multiple motion applications by simple download of the corresponding function firmware.
• With use of firmwares FS701 or CT702 this unit provides excellent solutions with all kinds of flying cut-to-length systems as well as with applications like labeling, printing, punching, sealing etc.
• Functions and properties are very similar to the FS340 controller described below.
• The range of functions includes extended possibilities with evaluation and blanking of print marks, floating print mark registers and more.
• The MC700 hardware is a black-box unit for cabinet mounting.
• Remote control and communication facilities via external operator terminal, serial PC communication, PROFIBUS or optional via CANBUS (MC700/CI) etc. (see Accessories).

Download Product Specifications

Get a Quote

Short description on FS801:

By using the FS801 firmware, the MC800 controller is equipped for motion control tasks with typical “on-the-fly-processing” machines for example sawing, cutting, punching and drilling.

• 2 pulse inputs with format A, /A, B, /B, Z, /Z [HTL, RS422] with an input frequency up to 2 MHz
• 2 control inputs with format SIN+, SIN-, COS+, COS- [1 Vss] with an input frequency up to 400 kHz
• 2 SSI inputs with format DATA+, DATA-, CLOCK+, CLOCK- up to 25 Bit, with SSI switching frequency of 100 Hz ... 1 MHz
• 2 scalable 14 bit analog inputs for ±10 V or 0/4 ... 20 mA
• 4 control inputs for PNP / NPN signals [10 ... 30 VDC]
• 4 fast interrupt inputs for PNP / NPN signals [10 ... 30 VDC]
• 1 pulse output with format A, /A, B, /B, Z, /Z [RS422]
• 4 control outputs with push-pull characteristic, short-circuit-proof [5 ... 30 VDC]
• 2 scalable 14 bit analog outputs for ±10 V or 0/4 ... 20 mA
• Loop time approx. 250 µs
• Power supply 18 ... 35 VDC
• Snap-on housing for top hat rail (according to EN 60715)
• OnBoard interfaces: Ethernet / IP, RS232 / RS485, USB 2.0, CANopen, Modbus RTU
• Optional Ethernet interfaces: EtherCAT, Ethernet / IP, Modbus TCP, Powerlink, PROFINET, SERCOS III
• Optional Fieldbus interfaces (slave): CC-Link, DeviceNet, PROFIBUS
• Operates with all 4-Q-drive systems, equipped with a standardized drive communication bus (e. g. SERCOS-II). Alternatively ±10 V setpoint can be used
• The controllers can be setup by an external operator terminal as well as HMI’s via standardized factory communication bus e. g. PROFINET
• Setup via windows operator software (free of charge

Download Product Specifications

Get a Quote

Short description on FS340:

The FS340 Controller is used to control flying saws or flying shears. They are used to cut materials to length if they can’t be stopped during the cutting process. It is a compact and low priced Controller for machining on-the-fly.

• 2 pulse inputs with format A, B, 90° [HTL] or A, /A, B, /B [RS422]
• 4 control inputs for HTL / PNP / NPN / Namur signals [10 ... 30 VDC]
• Input frequency up to 300 kHz
• 4 fast transistor outputs, push-pull, short-circuit-proof [5 … 30 VDC]
• 1 scalable 14 bit analog output (±10 V or 0/4 … 20 mA)

Download Product Specifications

Get a Quote

Short description on FS641:

The FS641 controller is used for flying material processing. The cut-length specification can be set quickly and conveniently via a keyboard with a front-mounted pre-selection switch. The FS641 controller also has a programmable switching function with 4 fast transistor outputs and an additional 4 potential-free change-over contact output relays that can be controlled.

• 2 pulse inputs with format A, B, 90° [HTL] or A, /A, B, /B [RS422]
• 4 control inputs for HTL / PNP / NPN / Namur signals [10 ... 30 VDC]
• Input frequency up to 300 kHz
• 4 fast transistor outputs, push-pull, short-circuit-proof [5 … 30 VDC]
• 4 potential-free changeover relay outputs
• 1 scalable 14 bit analog output (±10 V or 0/4 … 20 mA)
• Cutting length specification via keyboard or front BCD decade switch
• Power supply 24 VAC and 17 … 40 VDC
• Compact norm panel housing (according to EN 60715)
• Top hat rail mounting by using SM600 support brackets (option)
• Setup via keys or via PC by serial RS232 interface
• PROFIBUS conncetion via motrona gateway PB251

Download Product Specifications

Get a Quote