Short description on IP210:

The IP210 SSI / Parallel Signal Converter signals recorded via the SSI input are converted precisely and quickly by the IP210 converter into a parallel binary, Graycode or BCD format.

• SSI input with format DATA+, DATA-, CLOCK+, CLOCK- up to 32 Bit
• Impulse inputs A, B [HTL], A, /A, B, /B [RS422, HTL]
• 3 control inputs (Hold) for PNP signals [10 ... 30 VDC]
• Start-stop interface for absolute transducers and magnetostrictive sensors
• Input frequency up to 1 MHz
• 25-bit parallel output push-pull in BCD, binary or Gray code format
• Power supply 18 ... 30 VDC
• Compact housing for mounting on 35 mm top-hat rail (according to EN 60715)

Download Product Specifications

Get a Quote

Short description on IV210:

The SSI / Analog / Serial RS232/RS485 IV210 Signal Converter with its SSI interface converts absolute position values into fractions of a millisecond into a high-precision current or voltage value. Fluctuating input frequencies can be smoothed by a switchable average value. This IV210 signal converter also converts linked signals (A, B) such as sum, difference, product or ratio. It is suitable for connecting SSI absolute encoders 10 ... 32 bits in binary or gray format. Optional SSI master or slave operation with various functions such as concentricity or bit blanking.

• SSI input DATA+, DATA-, CLOCK+, CLOCK- [RS422], 32 Bit
• SSI clock frequency up to 1 MHz
• Analog output ±10 V or 0/4 ... 20 mA, 16 Bit
• Power supply 18 ... 30 VDC
• Snap-on housing for top hat rail (according to EN 60715)
• Setup via operator software OS6.0
• Serial RS232- / RS485 interface
• Pulse inputs A, B [HTL], A, /A, B, /B [RS422, HTL]
• Start-stop interface for absolute transducers and magnetostrictive sensors
• USB interface and RS232/RS485-interface for configuration and serial readout

Download Product Specifications

Get a Quote

Short description on IP251:

The IP251 SSI, Absolute / RS232 / Parallel Signal Converter is a small and cost-effective but extremely powerful converter for industrial machine applications in which sensor or encoder information in absolute SSI format is to be converted into a parallel binary, graycode or BCD format. The IP251 Signal Converter can also convert serial RS232 data into one of the above parallel formats. The IP251 Signal Converter is housed in a compact housing for DIN rail mounting and has 12 screw terminals and a 25-pin and a 9-pin SUB-D socket.

• SSI input with format DATA+, DATA-, CLOCK+, CLOCK-up to 25 Bit
• Clock frequency up to 1 MHz
• Control input (hold) for PNP signals [10 ... 30 VDC]
• 25 bit parallel output with push-pull characteristic with format BCD, binary or Gray-Code
• Power supply 18 ... 30 VDC
• Snap-on housing for top hat rail (according to EN 60715)
• Serial RS232 input

Download Product Specifications

Get a Quote

Short description on PR210:

The PR210 Parallel / Serial RS232 / RS485 Signal Converter is used to convert parallel data from encoders, sensors, BCD preselect switches or controllers into a serial data stream. Primarily, the PR210 is used when older controllers with a parallel data interface have to be replaced by more modern devices with a serial interface. When using the PR210 Parallel / Serial RS232 / RS485 Signal Converter, the existing, parallel structure and cabling of a machine can be maintained. In addition to this main application, the device can also be used for a variety of other tasks.

On the input side, the data can be either in the BDC, binary, or gray code. The input data is packaged in a serial protocol and sent over the serial interface to one or more receivers.

• 20 bit parallel input with format BCD, binary or Gray-Code
• Input frequency: fast encoder 5 kHz, auto-transmit / data logging 0.5 kHz
• 4 status outputs, with push-pull characteristic, short-circuit-proof [5 ... 30 VDC]
• Power supply 10 ... 30 VDC
• Snap-on housing for top hat rail (according to EN 60715)
• Serial RS232 / RS485 interface

Download Product Specifications

Get a Quote

Short description on GI210:

The GI210 Signal Converter is an encoder switch for contactless, bounce-free switching of two SSI encoders on a SSI master. The compact device is cascadable with other devices and is easily mounted by snapping onto a top-hat rail in the switch cabinet. Typical applications of the GI210 Signal Converter are in conveyor systems, where a smart device (master) makes the sum or difference of two independent SSI encoders. There are also applications in drive technology (e.g. automatic roll change) or in the general automation of redundant safety systems.

• Control input with format [HTL]
• 2 SSI inputs with format [RS422]
• Cutt-off frequency 100 kHz ... 1 MHz
• 2 encoder inputs, short-circuit-proof
• 1 SSI output with format [RS422]
• Power supply 12 ... 30 V DC
• Current consumption (unloaded) 50 mA
• Encoder supply 2 x 125mA (Vin – 2 V) short-circuit-proof
• Delay / Output / Input100 ns
• Operation temperature : 0 ... 45 °C (32 ... 113 °F)
• SSI pause time min. 25 ns
• Switching time is synchronized automatically with the next SSI break
• Cascadable for more SSI encoders
• All connections via pluggable screw terminal block
• Snap-on housing for top hat rail (according to EN 60715)
• LEDs for indication of the input pulses
• Dimension W x H x D = 22,5 x 121 x 112 mm (8.86 x 47.64 x 44.09'')
• Plastic housing incl. plug

Download Product Specifications

Get a Quote